The standard range

text
The range of the electrical unwinding ovens ARRAS MAXEI is divided in three different groups: EMD 100, EMD 150 and EMD 200.

Characteristics / range EMD 100/3 EMD
100/4		 EMD
150/3		 EMD
150/4		 EMD
150/5		 EMD
200/4		 EMD
200/5		 EMD
200/6
Serviceable width in mm 1000 1000 1500 1500 1500 2000 2000 2000
Serviceable height in mm 1000 1000 1500 1500 1500 2000 2000 2000
Serviceable depth in mm 1500 2000 1500 2000 2500 2000 2500 3000
Maximum acceptable load in KG* 400 500 500 700 900 900 1200 1500
Varnish content in %* 2 2 2 2 2 2 2 2
Overall width in mm 1890 1890 2340 2340 2340 2840 2840 2840
Overall height in mm 2720 2720 3280 3280 3280 4050 4050 4050
Overall depth in mm 2570 3120 2570 3120 3670 3120 3670 4230
Weight of the plant in KG 1150 1550 1200 1600 2000 1700 2100 2500
* for a good working in all security, these parameters must not be higher.

Characteristics / range EMD
100/3		 EMD
100/4		 EMD
150/3		 EMD
150/4		 EMD
150/5		 EMD
200/4		 EMD
200/5		 EMD
200/6
Programmable automaton x x x x x x x x
Programmed starting x x x x x x x x
Alarm report* x x x x x x x x
Control closed door x x x x x x x x
Door closing from 150°C 150°C 150°C 150°C 150°C 150°C 150°C 150°C
Sector cutting control x x x x x x x x
Power of heating chamber KW 16,2 22 21 26 30 36 48 54
Power of post combustion KW 9 9 13,5 13,5 30 30 30 42
Total power KW 26,3 31 36 42 65,5 68,2 80 98
Supply tension in V 400 tri 400 tri 400 tri 400 tri 400 tri 400 tri 400 tri 400 tri
Frequency in Hz 50 50 50 50 50 50 50 50
Option three-way recorder x x x x x x x x

LThe ovens EMD ARRAS MAXEI can be equipped with a trolley. In order to know the trolley capacity please refer to the maximum acceptable load. The ovens equipped with a trolley are made without sole. The upper part of the oven is considered as the sole of the oven. So, it is built with an optimal specific isolation to avoid the calorific losses. A system of thermal seal on each side enables an optimal watertightness and ensures an average temperature of 30°C during the burning cycle.
According to the customer’s need, the trolley rolling way formed with rails is placed on the ground or on the surface to avoid its exceeding in the workshop. This second solution is recommended by ARRAS MAXEI for reasons of security of the personnel.